BUNA N NITRILE



Call or Email Us with the Catalog Number Below For A FREE Quote
1-800-AAA-ACME •
info@acmerubber.com
MAJOR ADVANTAGES...
NITRILE NBR RUBBER - In addition to its resistance to petroleum oils and aromatic hydrocarbons, NBR is highly resistant to mineral oils, vegetable oils, and many acids.NITRILE RUBBER is often used in transformer oil, however a specific formulation is used for that application. A commercial NITRILE compound will not withstand transformer oil. NITRILE also has good elongation properties as well as adequate resilience, tensile and compression set. NITRILE RUBBER may be referred to as NBR rubber or Buna N rubber. HNBR rubber is hydrogenated nitrile it is not very common and typically is a custom order. XNBR carboxylated Nitrile is not very common and typically is a custom order. Most NITRILE compounds can withstand -30 to 220°F operating temperature. NITRILE RUBBER can be produced in a durometer range of 40 to 90 Shore A. NITRILE can be molded into parts, extruded in profiles or tubing or calendered into sheet goods.

LIMITATIONS...
Because of its cost, this elastomer is not usually recommended for applications where oil resistance is not a major problem. Where oil resistance is required, the cost is more than justifiable. NITRILE RUBBER is generally attacked by ozone, ketones, esters, aldehydes, chlorinated and nitro hydrocarbons.

Nitrile Rubber Chemical Designation: Butadiene Acrylonitrile (NBR)


Toll Free 1-800-AAA-ACME • Tel 480 966-9311 • Fax 480 966-2273
2003 E. Fifth St., Bldg. #1, Tempe, AZ 85281
Email
:
info@acmerubber.com

silicone rubber | fluorosilicone rubber | viton® fluoroelastomer | nitrile NBR rubber | neoprene rubber
hypalon rubber | natural rubber | EPDM rubber | SBR rubber | polyurethane rubber

molded rubber | lathe cutting rubber | die cut rubber | rubber fabrications | polyurethane casting
rubber splicing | machined rubber | rubber step bushings | rubber washers

rubber extrusions | extruded rubber | extruded U channels rubber | extruded L strips rubber
extruded U channels with bulbs | D bumpers extruded dock bumpers | extruded P strips rubber
extruded H channels rubber | extruded e channels rubber | extruded half rounds rubber
extruded wing bumpers rubber | T Shapes

neoprene rubber tubing | silicone rubber tubing | viton rubber tubing | polyurethane rubber tubing
neoprene rubber cord | silicone rubber cord | viton rubber cord | polyurethane rubber cord
EPDM rubber cord | sponge cord | buna n nitrile cord | neoprene EPDM square & rectangular strips
silicone square & rectangular strips | viton square & rectangular strips
sponge square & rectangular strips | rubber sheet

neoprene rubber sheet | neoprene EPDM cloth inserted sheet | silicone rubber sheet | silicone sponge sheet
silicone cloth inserted sheet | viton sheet | butyl rubber sheet | hypalon rubber sheet | buna n sheet black
buna n sheet FDA white | EPDM sheet | polyurethane sheet | latex sheet | natural gum rubber sheet
rubber matting | kalrez ® | nitrile vinyl PVC sponge sheet | aflas sheet
viton® sponge sheet | silicone vacuum blankets | fluorosilicone sheet | masticated rubber sheet

employment opportunities

© Copyright 2019 - AAA Acme Rubber Co., a division of Fillipone Enterprises

Information provided is given in good faith but without warranty, express or implied. Performance of these elastomers is dependent on conditions of use and it is the responsibility of the user to determine suitability for a particular application. Hypalon, Kalrez & Neoprene are trademarks or registered trademarks of E.I. du Pont de Nemours.
Viton is a trade mark of Chemours.    



Scroll above for information on Buna N Nitrile